The Notifier NRX-M711 Agile wireless input / output interface module is a battery operated RF device designed for use with the NRXI-GATE radio gateway, running on an addressable fire system (using a compatible proprietary communication protocol).

It is a dual module having separate input and output capability, combined with a wireless RF transceiver and is supplied with a wireless back box.

This device conforms to EN54-18 and EN54-25. It complies with the requirements of 2014/53/EU for conformance with the RED directive.

Notifier NRX-M711 Agile Wireless Interface Module Specification

• Supply Voltage: 3.3 V Direct Current max.
• Standby Current: 122 μA@ 3V (typical in normal operating mode)
• Red LED Current Max: 2 mA
• Green LED Cur. Max: 5.5 mA
• Re-Sync Time: 35s (max time to normal RF communication from device power on)
• Batteries: 4 X Duracell Ultra123 or Panasonic Industrial 123
• Battery Life: 4 years @ 25oC
• Radio Frequency: 865-870 MHz. Channel width: 250kHz
• RF Output Power: 14dBm (max)
• Range: 500m (typ. in free air)
• Relative Humidity: 5% to 95% (non-condensing)
• Terminal Wire Size: 0.5 - 2.5 mm2
• IP Rating: IP20

Input Module

• End-of-Line Resistor: 47K
• Supervision Current: 34 μA typical

Output Module

• End-of-Line Resistor: 47K
• Supervision Current: 60 μA typical
• Relay Contacts: 2 A @ 30 VDC (resistive load)

External Power Supply Unit

• Voltage: 30V DC max. 8V DC min.

Did you know that Notifier equipment needs to be commissioned by a trained Notifier Agent engineer.  We can provide commissioning services for Notifier equipment - please contact us on 01200 428 410 or sales@thesafetycentre.co.uk if you're interested in these services.